13549213581  肖生

 

 

ptfe Rulon J,孤立绝缘体ptfe,印刷机零件ptfe,轴承ptfe

Rulon J

聚四氟乙烯

Saint Gobain Performance Plastics

 

产品说明

 

Rulon® J is an all-polymeric reinforced, dull gold colored PTFE compound that operates exceptionally well against soft mating surfaces such as 316 stainless steel, aluminum, mild steel, brass and other plastics. The unique "shaft friendly" material is also low in friction and wear and self-lubricating.

 

Rulon® J has one of the lowest coefficients of friction of most reinforced PTFE materials. This makes it ideally suited for start/stop applications where stick-slip must be eliminated. The tribological properties of this material also make it suitable for both bearing and wear component applications.

 

总体

 

材料状态 • 已商用：当前有效

供货地区 • 北美洲

性能特点 • 低摩擦系数 • 耐磨损性良好 • 自润滑

• 电气部件 • 密封 • 营业设备

用途 • 电器用具 • 汽车领域的应用：

• 轴承

• 孤立绝缘体ptfe,印刷机零件ptfe,轴承ptfe • 印刷机零件

外观 • 金色

形式 • 可定制外形

加工方法 • 机器加工 • 挤出

 

物理性能 额定值单位制 测试方法

比重 1.95g/cm³ ASTM D792

吸水率 (24 hr) 0.0% ASTM D570

机械性能 额定值单位制 测试方法

抗张强度 (屈服) 13.8MPa ASTM D638

伸长率 (断裂) 180% ASTM D638

摩擦系数 0.16 ASTM D1894

负载变形 (10 MPa) 3.00% ASTM D621

热性能 额定值单位制 测试方法

线形膨胀系数 ASTM D696

流动: 26 到 93°C 0.00012cm/cm/°C

流动: 26 到 149°C 0.00012cm/cm/°C

横向: 26 到 93°C 0.000088cm/cm/°C

横向: 26 到 149°C 0.000094cm/cm/°C

导热系数 0.29W/m/K ASTM C177

补充信息

Temperature, Typical Range: -400° to 550°F

Flammability, ASTM D635: non-flammable

Maximum Pressure(P): 750 psi

Maximum Velocity with no load (V-SFM): 400 ft/min

Maximum PV (PxV): 7500 psi x ft/min

Shaft Hardness - Minimum: Rb25

Shaft Finish recommended: 8 ot 16 Ra

Shaft Material: 316 stainless steel and non-ferrous

Chemical Resistance: chart available

Coef. of Friction, ASTM D1894, static & dynamic: 0.12 to 0.20

 

 

 

 

注塑级聚四氟乙烯 Saint Gobain - Norton  注塑级PTFE  Rulon® J 塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

 

13549213581  肖生